dbittle
Well-Known OPE Member
- Local time
- 9:16 AM
- User ID
- 555
- Joined
- Jan 16, 2016
- Messages
- 93
- Reaction score
- 181
- Location
- north alabama
I'm trying to get a Zama EL-42 dialed in on my mildly ported Husqvarna 346. Out of the box, it needed a little more fuel, so I drilled the main nozzle through both sides, which is I think the usual fix. I took the main nozzle to work and asked a machinist friend to drill it, which he did with a .029" bit. I tried the saw today and it was smoking rich even with the high screw turned all the way in. Does anyone have the part number and a source for those nozzles?