DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[CoreyB]

So whats the deal with the yellow ones?

I was wondering the same thing

 

[166]

I believe there are only six of these saws in the US. There were four at this 166 gathering at Lee's 3 years ago.

Two of these Super Pro 118's are Lee's and the closest one is ours.

 

[heimannm]

I don't know the full story, but there were a family of Dolmar saws painted in almost McCulloch colors and sold only in Australia as McCulloch's.





I had the opportunity to travel to Australia on business and was able to make some contacts and pick up a couple of saws while I was there a few years ago.



Terry Titchner is a fishing guide as well.



I was really there.



I did get a 73 from Terry on a later trip, but was never able to get one of the Australia only 47A models.

Mark

 

[Backtroller]

I nearly had to run downstairs and check to see if my saw was there! Twins. I like it

Miller Mod Saws ported 6421/7910 conversion with unlimited coil

 

[ajschainsaws]

Can anybody shed some light on the later 115 is it a saw that responds well to porting I haven't ever seen or heard of one woods ported only stock saws around here

 

[SixGun]

Quick question guys, I got a couple of these in some NOS parts. Piston is Mahle and measures 55mm bore, 48mm high and pin is just under 12mm. any ideas what saw this is for ? Thanks

 

[psuiewalsh]

Looks like 153 uses 55mm. Could be a cutoff piston too?

 

[psuiewalsh]

looks similar http://dlastore.ecrater.com/p/11782668/piston-kit-fit-dolmar-152-153-310-55mm

 

[SixGun]

Thank You,
what exactly do you mean by cutoff ? Like a cutoff saw ?

 

[SixGun]

That does look like it

 

[psuiewalsh]

https://images.search.yahoo.com/ima...&sigb=11uaaqqs3&sign=124qq72v8&sigt=124qq72v8

 

[mdavlee]

 

[166]

Dolmar 153 and the Dolmar 310 Cutoff are the same engine.

 

[titanman6100]

dont know why you cant see the pic but here you go

 

[psuiewalsh]

That pretty much covers it.

 

[psuiewalsh]

Anyone ever had a clutch drum stuck on? I suggested to a friend we could weld a puller to his drum to force it off. Any other ideas?

 

[psuiewalsh]

I think he tried a vise grip slide hammer and no joy

 

[huskihl]

I think he tried a vise grip slide hammer and no joy

Gotta get some spray oil to the bearing. Vise grips and wiggle the hell out of it. Maybe add some heat

 

[psuiewalsh]

He had taken it to two dealers. I told him to take it to the machine shop for the puller weld if dealer cannot get it.

Sent from my C771 using Tapatalk 2

 

[Backtroller]

I've had really good luck with Kroil. It's saved countless nut and bolts for me on cars in the snow belt