High Quality Chainsaw Bars Husqvarna Toys

Vintage Chainsaw Museum

heimannm

Here For The Long Haul!
GoldMember
Local time
2:32 PM
User ID
714
Joined
Jan 28, 2016
Messages
2,850
Reaction score
19,127
Location
Dike, Iowa
Country flag
medicineman prompted me to look for the measuring cup to compliment my McCulloch fuel can. I met with some success.

20240220_141652.jpg

The can that came with it is somewhat rusty so I put it up on a higher shelf...

Mark
 

heimannm

Here For The Long Haul!
GoldMember
Local time
2:32 PM
User ID
714
Joined
Jan 28, 2016
Messages
2,850
Reaction score
19,127
Location
Dike, Iowa
Country flag
Turd Ferguson hooked me up with a guy selling this two man bar with a decal for the logo. There was some serious rust (pitted) in spots due to being stored in the cardboard sleeve under less than idea conditions. We cleaned it up as best we could, certainly nice enough to look at hanging on the wall.

20240224_153905.jpg

I though the cardboard sleeve should also go up on the wall. Not sure how long it will hold up as the paper has become pretty fragile over the years. Must be old, Los Angeles had a two digit postal code...

20240224_154418.jpg

Come see the display for yourself sometime.

20240224_154408.jpg

Mark
 

heimannm

Here For The Long Haul!
GoldMember
Local time
2:32 PM
User ID
714
Joined
Jan 28, 2016
Messages
2,850
Reaction score
19,127
Location
Dike, Iowa
Country flag
I also finished the clean up/reassembly of this Homelite 25 LCS. They really went all out on the paint scheme on their older saws.

20240226_172721.jpg

20240226_172725.jpg

20240226_172738.jpg

Float type carburetor swivels to maintain the orientation when making a felling cut.

20240226_172818.jpg

Remember Esso?

20240227_112834.jpg

Mark
 

LAWN BOY

Pothole
Local time
12:32 PM
User ID
28603
Joined
Feb 27, 2024
Messages
687
Reaction score
1,170
Location
Merrill, WI
Country flag
I've been keeping busy with saw repairs, chain sharpening, parts orders, and wood cutting along with other household chores trying to get things ready for winter but did find time to get a couple of saws cleaned up for the display this week.

This one is a very low hour that really only needed wiping the dust off.

View attachment 397516

View attachment 397517

View attachment 397518

View attachment 397519

View attachment 397520

If it reminds you of a McCulloch PM610, there is a good reason for that.

Mark
Nice, I have the McCulloch version of that saw.
 

LAWN BOY

Pothole
Local time
12:32 PM
User ID
28603
Joined
Feb 27, 2024
Messages
687
Reaction score
1,170
Location
Merrill, WI
Country flag
It had a points replacement chip but I cleaned and adjusted the points, condenser was good, so we are back to the original ignition operation.

View attachment 390707

View attachment 390708

View attachment 390709

View attachment 390710

Like the 190 A, this one used a pressurized oil tank for the automatic oiler (flow control knob is on the right above) but also has a manual pump plus an additional valve that is operated by the throttle.

View attachment 390711

Mark
Very nice. That’s a saw I’ve been on the look out for.
 

Partner

Pinnacle OPE Member
Local time
9:32 PM
User ID
11875
Joined
Mar 2, 2020
Messages
1,106
Reaction score
2,759
Location
Poland
Country flag

Partner

Pinnacle OPE Member
Local time
9:32 PM
User ID
11875
Joined
Mar 2, 2020
Messages
1,106
Reaction score
2,759
Location
Poland
Country flag
All over Europe, the one with the tiger mascot, correct?
This is not such a popular station in my place, but I saw it somewhere 😉🤠 I found out that they were bought by Lotos quite a long time ago, so I think I've seen them more abroad recently
 
Last edited:
Top