What's on your bench?

[davidwyby]

You guys who have repair shops, how much education do you do when a customer brings in a saw trashed from dull chain, etc.? Seems like a good way to sell 2n1 sharpeners...

 

[Ronie]

2152 getting ready to come off the bench.

 

[tickbitintn]

2153 getting ready to come off the bench.

View attachment 273163

Black red version looks so much better than the orange. [emoji106]

Sent from my XT1635-01 using Tapatalk

 

[Ronie]

Black red version looks so much better than the orange. [emoji106]

Sent from my XT1635-01 using Tapatalk

Best looking saws on the planet!

 

[davidwyby]

I gotta say I prefer the more square shaped saws from when I was a kid.

 

[Ronie]

I gotta saw I prefer the more square shaped saws from when I was a kid.

Red, orange, yellow, green, orange and white, new, old, I like them all.

 

[markds2]

OE346xp just finished...

 

[Moparmyway]

Cylinder is probably coming off again, gotta open the chamber a little

 

[WillG]

Picking up the new whip tomorrow after work! In addition to the cv boots and whatnot they're also going to give it a full service before they detail it! Also found out that it has the sport appearance package which makes it look pretty sweet!

Sent from my E6910 using Tapatalk

 

[MustangMike]

I could tell from the black wheels.

My wife's Edge ST has black wheels also.

I did not opt for the brake upgrade because 1) the standard brakes looked very good, and 2) the upgrade includes Summer tires, and I wanted the all season tires on it. The tires that come on it work very nice, and are M+S rated.

 

[RI Chevy]

View attachment 273203

Cylinder is probably coming off again, gotta open the chamber a little

Too much compression Kev?

 

[Moparmyway]

Too much compression Kev?

Just a smidge

 

[RI Chevy]

Lol. Would be ok for 50cc. [emoji2957]
What are you looking to achieve?
195-200?

 

[av8or3]

Thinking about fueling it up and running it. I would also be interested in knowing the difference in models 7310 vs 7300 for example. Same saw? I’m also considering acquiring a 7900.

 

[davidwyby]

I might have a 7910 for sale.

 

[Ronie]

Going to try to give that 2152 some more torque with a 346 cylinder.

 

[huskyboy]

Thinking about fueling it up and running it. I would also be interested in knowing the difference in models 7310 vs 7300 for example. Same saw? I’m also considering acquiring a 7900. View attachment 273313

7310 has a slab side piston in it, 12,800rpm coil and a muffler with different more restrictive SLR baffling inside of it. The 7300 has a windowed piston, 13,500rpm coil and less restrictive muffler.

 

[WillG]

Yard Machines / MTD / Toro 522 snowblower. 5 hp Tecumseh, 22" path. Picked up for a repair. Recoil has a suspected broken spring and the carb most likely needs rebuilt. I'll end up servicing it too.

Sent from my E6910 using Tapatalk

 

[av8or3]

7310 has a slab side piston in it, 12,800rpm coil and a muffler with different more restrictive SLR baffling inside of it. The 7300 has a windowed piston, 13,500rpm coil and less restrictive muffler.

Thanks!

 

[av8or3]

I’m gonna skip the Dolmar for now. I’ve decided to get another old saw up, running and cutting. This will be the one. Jonsereds XF.