High Quality Chainsaw Bars Husqvarna Toys

I've been told to leave so farewell comment

Marshy

WFO Cutting
Local time
4:08 PM
User ID
417
Joined
Jan 5, 2016
Messages
3,800
Reaction score
13,095
Location
Mexico NY
I'll spare you the background conversation because my account will be closed in 20 minutes. Here's a final comment that I gave Randy when he asked me to ask IH if he was sending the cylinder back.


"A straight answer? Why don't you go to the source and ask Jesse what IH agreed to about getting the P/C and money back? Why would you want to hear what IH tells me? I don't understand your logic, maybe you just want the full story from my point of view???
I sent IH a message and he hasn't replied. The only thing I know is what he already announced in his video, that he was going to send it and refund him.

You obviously think I'm in his hip pocket but you are off base. I tried to be objective about the whole thing because I've seen some good running saws and a lot better looking port work from the guy and I got dragged through the mud when I suggested he should have been allowed to make it right before you started that thread. I had/have no knowledge that he was afforded that opportunity when you made that thread. I even asked IH if Jesse ever expressed any concerns with performance and he told me no. He told me Jesse contacted him once after he had the saw and they discussed an electrical issue and that Jesse was going to get a switch or coil from his friend.

At first I thought his initial reply via first video was fitting but later once the pictures were posted I realized that was a poor decision on his behalf. When the pics were provided I admitted that saw was *s-word. I EVEN TOLD IH THAT SAW WAS *s-word BEFORE I MADE MY REPLY HERE. That might be why he doesn't want to talk to me IDK. Its hard not to be defensive in the moment (and I struggle with that at times so I get it) but anything less than accepting full responsibility for sending out a saw with that caliber of work at that price is not acceptable to me and I made it know to him. Nothing I'm saying here, if made in that post, would matter to any of you because you are all hell bent on ripping apart peoples character. In hindsight, he should have been more humble about it and addressed the fact that no matter what, scratches like that were not acceptable.

Excuse me for having a *frenching mind of my own and trying to validate whats being said and try to make sense of it. You guys want to continue to rip apart people's character then go a head its no place I want to spend my time. You should consider looking at the people within your own circle. Who in their right mind would allow folks to hold charity for them because they need money to re-shingle their house roof but then goes and buy a Harley Davidson? That's *frenched up right there, I dont care who you are."


There's a lot more to be said about all of this. Dont think it's the whole story in its entirety. Since I'm cramped for time I suppose it will have to work for now. Any one of you that still have the brass and want to talk face to face know how to get a hold of me.
 

leadfarmer

Hot Rod !!!
Local time
4:08 PM
User ID
300
Joined
Dec 28, 2015
Messages
10,074
Reaction score
71,164
Location
S Central PA
Country flag
I'll spare you the background conversation because my account will be closed in 20 minutes. Here's a final comment that I gave Randy when he asked me to ask IH if he was sending the cylinder back.


"A straight answer? Why don't you go to the source and ask Jesse what IH agreed to about getting the P/C and money back? Why would you want to hear what IH tells me? I don't understand your logic, maybe you just want the full story from my point of view???
I sent IH a message and he hasn't replied. The only thing I know is what he already announced in his video, that he was going to send it and refund him.

You obviously think I'm in his hip pocket but you are off base. I tried to be objective about the whole thing because I've seen some good running saws and a lot better looking port work from the guy and I got dragged through the mud when I suggested he should have been allowed to make it right before you started that thread. I had/have no knowledge that he was afforded that opportunity when you made that thread. I even asked IH if Jesse ever expressed any concerns with performance and he told me no. He told me Jesse contacted him once after he had the saw and they discussed an electrical issue and that Jesse was going to get a switch or coil from his friend.

At first I thought his initial reply via first video was fitting but later once the pictures were posted I realized that was a poor decision on his behalf. When the pics were provided I admitted that saw was *s-word. I EVEN TOLD IH THAT SAW WAS *s-word BEFORE I MADE MY REPLY HERE. That might be why he doesn't want to talk to me IDK. Its hard not to be defensive in the moment (and I struggle with that at times so I get it) but anything less than accepting full responsibility for sending out a saw with that caliber of work at that price is not acceptable to me and I made it know to him. Nothing I'm saying here, if made in that post, would matter to any of you because you are all hell bent on ripping apart peoples character. In hindsight, he should have been more humble about it and addressed the fact that no matter what, scratches like that were not acceptable.

Excuse me for having a *frenching mind of my own and trying to validate whats being said and try to make sense of it. You guys want to continue to rip apart people's character then go a head its no place I want to spend my time. You should consider looking at the people within your own circle. Who in their right mind would allow folks to hold charity for them because they need money to re-shingle their house roof but then goes and buy a Harley Davidson? That's *frenched up right there, I dont care who you are."


There's a lot more to be said about all of this. Dont think it's the whole story in its entirety. Since I'm cramped for time I suppose it will have to work for now. Any one of you that still have the brass and want to talk face to face know how to get a hold of me.
When your health is such that your not sure if tomorrow is your last, I then will attempt to understand your reasoning......
 

XP_Slinger

They’re Just Saws
Local time
4:08 PM
User ID
845
Joined
Feb 9, 2016
Messages
6,089
Reaction score
27,519
Location
Central NY
Country flag
I'll spare you the background conversation because my account will be closed in 20 minutes. Here's a final comment that I gave Randy when he asked me to ask IH if he was sending the cylinder back.


"A straight answer? Why don't you go to the source and ask Jesse what IH agreed to about getting the P/C and money back? Why would you want to hear what IH tells me? I don't understand your logic, maybe you just want the full story from my point of view???
I sent IH a message and he hasn't replied. The only thing I know is what he already announced in his video, that he was going to send it and refund him.

You obviously think I'm in his hip pocket but you are off base. I tried to be objective about the whole thing because I've seen some good running saws and a lot better looking port work from the guy and I got dragged through the mud when I suggested he should have been allowed to make it right before you started that thread. I had/have no knowledge that he was afforded that opportunity when you made that thread. I even asked IH if Jesse ever expressed any concerns with performance and he told me no. He told me Jesse contacted him once after he had the saw and they discussed an electrical issue and that Jesse was going to get a switch or coil from his friend.

At first I thought his initial reply via first video was fitting but later once the pictures were posted I realized that was a poor decision on his behalf. When the pics were provided I admitted that saw was *s-word. I EVEN TOLD IH THAT SAW WAS *s-word BEFORE I MADE MY REPLY HERE. That might be why he doesn't want to talk to me IDK. Its hard not to be defensive in the moment (and I struggle with that at times so I get it) but anything less than accepting full responsibility for sending out a saw with that caliber of work at that price is not acceptable to me and I made it know to him. Nothing I'm saying here, if made in that post, would matter to any of you because you are all hell bent on ripping apart peoples character. In hindsight, he should have been more humble about it and addressed the fact that no matter what, scratches like that were not acceptable.

Excuse me for having a *frenching mind of my own and trying to validate whats being said and try to make sense of it. You guys want to continue to rip apart people's character then go a head its no place I want to spend my time. You should consider looking at the people within your own circle. Who in their right mind would allow folks to hold charity for them because they need money to re-shingle their house roof but then goes and buy a Harley Davidson? That's *frenched up right there, I dont care who you are."


There's a lot more to be said about all of this. Dont think it's the whole story in its entirety. Since I'm cramped for time I suppose it will have to work for now. Any one of you that still have the brass and want to talk face to face know how to get a hold of me.
We’ll drop some trees and eat some chili...just waiting on the weather to cooperate
 

Marshy

WFO Cutting
Local time
4:08 PM
User ID
417
Joined
Jan 5, 2016
Messages
3,800
Reaction score
13,095
Location
Mexico NY
We’ll drop some trees and eat some chili...just waiting on the weather to cooperate
I did some myself this past weekend. Square filed chain in some ash... omg, I should have done this sooner. Ground is still soft in places though. I'll be in touch regardless of what happens here.
 

CJ Brown

I learned it from a hockey card...
Local time
4:08 PM
User ID
2704
Joined
Feb 26, 2017
Messages
1,048
Reaction score
3,892
Location
Belleville, Ontario, Canada
Country flag
The whole ongoing character assassination of IH has been really ugly to watch. Now at least 2 people have been banned for having the balls to express a dissenting view, and maybe I will be the 3rd. All this over a guy frenching an old chainsaw.

"It's a small club, and you ain't in it".
 

Mastermind

Chief Cat Herder
Staff member
GoldMember
Local time
3:08 PM
User ID
4
Joined
Dec 3, 2015
Messages
47,620
Reaction score
308,394
Location
Banner Springs Tennessee
Country flag
The whole ongoing character assassination of IH has been really ugly to watch. Now at least 2 people have been banned for having the balls to express a dissenting view, and maybe I will be the 3rd. All this over a guy frenching an old chainsaw.

"It's a small club, and you ain't in it".

Ain't nobody been banned.

For the record I don't like looking like part of the mean girls club either.

I've asked many times for people to let the whole thing go.....deleted one thread, locked another, and an about to lock yet another.

All I wanted to do was get some information out......not beat a dead horse into pulp.

Sadly....that never goes as it should.

I for one am sick of reading about the guy.
 

BlacknTan

Super OPE Member
Local time
4:08 PM
User ID
10910
Joined
Nov 8, 2019
Messages
204
Reaction score
760
Location
New York
I'm still pretty new here, and probably should keep my mouth shut, but withholding my opinion has never been a strong point..

I come here to read, learn, interact and enjoy myself. I read the drama, but it's like eating at McDonalds, I'm sorry for it afterward. I hate to see good folks leave over mere differences of opinion. It's like car dealers say.. There's an ass for every seat. Same with opinions, which is we all express... at least that's what I do.

I have no dog in this fight, and no axe to grind. The work of the subject looked crude to me, but I'm no expert on the matter.

Maybe I'm too Pollyanna, but can't we shake hands and agree to disagree? It can't be all that bad. Folks have been stickin' it to others since Cain met Abel (or, Abel met Cain, don't remember which!) There are some other New Yawkers I'd like to meet up with someday...
 

CJ Brown

I learned it from a hockey card...
Local time
4:08 PM
User ID
2704
Joined
Feb 26, 2017
Messages
1,048
Reaction score
3,892
Location
Belleville, Ontario, Canada
Country flag
Ain't nobody been banned.

For the record I don't like looking like part of the mean girls club either.

I've asked many times for people to let the whole thing go.....deleted one thread, locked another, and an about to lock yet another.

All I wanted to do was get some information out......not beat a dead horse into pulp.

Sadly....that never goes as it should.

I for one am sick of reading about the guy.

You knew what would happen as soon as you created the initial thread. This isn't your 1st rodeo here or elsewhere. And posting pics of the blue goo cylinder in the build thread, without saying who ACTUALLY frenched that cylinder, was just more of the same crap designed to inflame anger towards IH - to what end, at this point? You were just fanning the flames.
 

Mastermind

Chief Cat Herder
Staff member
GoldMember
Local time
3:08 PM
User ID
4
Joined
Dec 3, 2015
Messages
47,620
Reaction score
308,394
Location
Banner Springs Tennessee
Country flag
You knew what would happen as soon as you created the initial thread. This isn't your 1st rodeo here or elsewhere. And posting pics of the blue goo cylinder in the build thread, without saying who ACTUALLY frenched that cylinder, was just more of the same crap designed to inflame anger towards IH - to what end, at this point? You were just fanning the flames.

Keep in mind that I didn't drag Ol Ironhorse here. Others did. I tried my best to ignore it. I even talked to the guy on the phone, agreed to try to call off the guys with pitchfolks, and shut down the first thread because I saw a guy that was trying to build a following because he needed the money. Then.....it turns out that the guy is in fact a hack....and a crook. When I posted my thread on the subject, I did so because I felt that I'd been wrong about Harvey, and wanted to be on the record saying so.

I didn't post the pictures of the blue goo jug.

Now....if you wanna come after me.....bring it on.....I'm not ascared. LOL
 

CJ Brown

I learned it from a hockey card...
Local time
4:08 PM
User ID
2704
Joined
Feb 26, 2017
Messages
1,048
Reaction score
3,892
Location
Belleville, Ontario, Canada
Country flag
Keep in mind that I didn't drag Ol Ironhorse here. Others did. I tried my best to ignore it. I even talked to the guy on the phone, agreed to try to call off the guys with pitchfolks, and shut down the first thread because I saw a guy that was trying to build a following because he needed the money. Then.....it turns out that the guy is in fact a hack....and a crook. When I posted my thread on the subject, I did so because I felt that I'd been wrong about Harvey, and wanted to be on the record saying so.

I didn't post the pictures of the blue goo jug.

Now....if you wanna come after me.....bring it on.....I'm not ascared. LOL
Hmmm.. well not the 1st time I've stuck my foot in my mouth. I apologize for the false accusation.

However, that doesn't change my views on the matter in any way.
 

66Fleetside

Super OPE Member
Local time
3:08 PM
User ID
11638
Joined
Feb 3, 2020
Messages
105
Reaction score
277
Location
SE MO
I'm still pretty new here, and probably should keep my mouth shut, but withholding my opinion has never been a strong point..

I come here to read, learn, interact and enjoy myself. I read the drama, but it's like eating at McDonalds, I'm sorry for it afterward. I hate to see good folks leave over mere differences of opinion. It's like car dealers say.. There's an ass for every seat. Same with opinions, which is we all express... at least that's what I do.

I have no dog in this fight, and no axe to grind. The work of the subject looked crude to me, but I'm no expert on the matter.

Maybe I'm too Pollyanna, but can't we shake hands and agree to disagree? It can't be all that bad. Folks have been stickin' it to others since Cain met Abel (or, Abel met Cain, don't remember which!) There are some other New Yawkers I'd like to meet up with someday...

Well said.
 

Wonkydonkey

Plastic member
Local time
8:08 PM
User ID
3189
Joined
May 14, 2017
Messages
4,564
Reaction score
18,063
Location
Sussex, UK.
Country flag
@Marshy sometimes you have to fight though the crap to find your the better buddies.... I understand it can be difficult... but what you find in the end is you have different friends and different circles...
We’re all human and some just don’t get along with others.. some you can help and some you can’t...

Stick around.. abit ... put a few members on your ingnore list.. and filter/ignore some of the threads you read...


I do hope you stick around:) ;)
 
Top