mainer_in_ak's latest activity
-
mainer_in_ak replied to the thread Good thickness planer.Have had decent luck with the older Dewalt DW734 planer. Portable, but holy sht is it heavy. Have used it for 4 years, planing alaska... -
mainer_in_ak replied to the thread Thoughts on Rip Chain Brands and Quality.Seachaser, I've run 8 pin .404 and 7 pin .404 with the pav-ported CS 1201. Running 8 pin with the full house chain, the saw got hot but...
-
https://www.ebay.com/itm/285006111930
-
https://www.amazon.com/Husqvarna-585550084-X-Cut-Chain-050/dp/B083JN1CWZ/ref=asc_df_B083JN1CWZ/?tag=hyprod-20&linkCode=df0&hvadid=6937116...
-
.58 84dl https://www.ebay.com/itm/115605106498
-
https://www.amazon.com/Husqvarna-Chainsaw-Chain-H80-84-501846584/dp/B01M3P7JFT/ref=mp_s_a_1_62?crid=3O3NGNUPVA6GA&dib=eyJ2IjoiMSJ9.3FkAeC...
-
mainer_in_ak reacted to Gullet's post in the thread Prices: stihl, oregon, husq 3/8 chain? with
Like.
The Dukes. It's not bad at all. It stretches at first, but it holds a edge pretty well. -
mainer_in_ak reacted to Wilhelm's post in the thread Prices: stihl, oregon, husq 3/8 chain? with Like.
Technically, the shipping is not free on the Stihl & Husqvarna chains - it is rather "included". The Oregon chain is a good deal...
-
Hey all, are there any better prices at the current moment? Please share a link to this thread if you find a good deal. So far I've...
-
mainer_in_ak replied to the thread V-MODEST.I buy various saw stufff from him almost every month and have had a great experience with everything purchased. Haven't yet tried his...
-
mainer_in_ak replied to the thread Milling small logs?.Wilhelm, It's up to you where your first cut goes. I've never cared too much, that my cuts were exactly parallel to the center of the...
-
mainer_in_ak replied to the thread V-MODEST.How can these Chinese companies with all these shell names like "V-modest" get away with literally copying current Stihl chainsaw...
-
mainer_in_ak replied to the thread V-MODEST.Can get a 4-pack of 84 drivelink Oregon EXL for $79 free shipping. That's under $20 per loop. No thanks on the Chinese stuff.
-
mainer_in_ak replied to the thread Milling small logs?.Wilhelm, do you have a ladder you could use? it works very well for a straight edge for the first cut. Once I've removed the screws...
-
He's probably a big Limp Bizkit fan.