Search results

Here's to a job well done! Just completed a comprehensive overhaul on the Stihl 046. We meticulously disassembled every part, subjecting them to a thorough ultrasonic cleaning process. The crankcase was not only cleaned but also received a durable powder coat finish, enhancing its longevity. Any...

my neigbor is in need of a switch or his 038

has anyone tried the E3 spark plugs in their saws? I wasnt able to get an ngk at the hardware store that is a stihl dealer unless i got a whole kit of stuff that i didnt need. so i got one to try and so far it has been working out, but i dont run my saws every day. Just curious.

Has anyone changed the color of their plastic covers using dye? It seems that i have seen some on here but the search feature didnt bring up any info. I want to dye an orange cover to black its brand new and has no oil or gas on it at all

what are the pros and cons of using a flywheel that has the magnent for heated handlebars? the magnent ads a little weight does it limit or have any influence at all on rpms say on a ported saw where you would be trying to make more rpm? im just curious what people think and what saw builders...

anyone ever see one of these before?

does anyone have a service manuel for the model listed thank you

i just had a friend bring me two brand new stihl chisel chains to grind and the cutters are noticably side beaked as well as softer than stihl chains used to be. Does anyone have an idea why or what the thinking is here?

im looking for a tank and heat shield if it is supposed to have one

Ok so here we go, I have built from the case up a jonsered cs2188/390xp it has all new oem everything except for the fly wheel and coil. it pressure/vac tests fine but the H needle has little or no effect on it. it starts and idles just fine and it runs fine two i ran a couple of tanks of gas...

this will be an easy question. for all of you porters has anyone ran their saw before porting with timed cuts then just done case matching and a muffler mod then taken times with the same wood and chain to see if there were noticable gains? I have an older stihl that had good port numbers and...

does anyone know how to reuse the small black metal engine/saw id tag on a husqvarna chainsaw that is riveted on? thanks

can someone please tell me how far to tap this seal in

does anyone have a service manual for this trimmer? thanks

im looking for one of the saws listed above for parts doesnt matter which one i just need it to have all of the screws and soft parts clutch and flywheel. dont need the coil but need the coil screws and dont need the tank or carb but need all ot the carb stuff

can someone please tell me where the hose in the picture that im holding is supposed to connect to underneath. i can see where it goes through the mounting plate but cannot see anything on the tank that it hooks too. i have looked at IPLs for this saw nad 390xp since they are the same saw and...

does anyone know if the front handlebars are interchangeable on these two saws? the part numbers are not exactly the same but most of the number is

can anyone tell me how old these two saws are by these numbers and/or any other info from the numbers thank you

can anyone tell me how old these saws are by this number?

want a set of the larger dogs for a husky 357xp. I cant bring myself to spend what they want for them new more than fifty dollars is just not happening